Troubleshooting guide

Back panel of CD-player from left to right the connectors are :

AC Power connection 240V / 230V / 220V / 115V / 100V AC dependent on country.Digital

input/CD select(The switch on the back can change the CD and Digital input function). Co-

axial and Optical/Tos-link digital input.Digital output Phono/RCA .Unbalanced vacuum tube

outputs Phono/RCA right/left.Balanced signal outputs XLR right/left

We recommend to connect signal cables to the CD-player when the CD-player and all the

other units of the audio system is switched off.

The CD-player has two types of analog audio outputs: unbalanced (vacuum tube) audio

signal with RCA plugs (phono plugs) and true balanced audio signal with XLR plugs (pin 2 is

positive phase, pin 3 is negative phase and pin 1 is chassis earth).

The CD-player has got one RCA standard SPDIF digital audio output. Digital signal level is

0.5Vpp when terminated in 75 ohm load. This is the standard load impedance of external

DAC's and other recording equipment.

The CD-player has got one RCA standard co-axial and optical digital input. When the

switchs on the digital input ,the CD-player becomes a DAC.

TECHNICAL SPECIFICATIONS

Consonance Reference CD-2.2MK 3 High End CD-player

Specifications:

DAC resolution 24bit 192KHz multilevel sigma-delta with synchronous upsampling

Clock Jitter Less than 14ps directly distributed to DAC

0dBFS signal output 2.3V RMS (RCA),4.6V (XLR)

Output Terminals Gold plated Tube RCA unbalanced and gold plated XLR balanced

Frequency response Less than +/- 0.1 dB deviation 20Hz-20kHz

Phase response Less than 2 degrees deviation 20Hz-20kHz

Signal-to-noise ratio More than 110dB (XLR output)

Signal-to-noise ratio More than 100dB (Vacuum tube RCA output)

Crosstalk Less than -100dB

Distortion (XLR) Less than 0.0025%

Distortion (RCA) Less than 0.03%

Intermodulation Less than 0.002% (19kHz + 20kHz)

Remote Control Philips RC-5 compatible IR system 36kHz modulation frequency

Vacuum tube Sovtek 6H30 x1

Dimensions / Weight 12cm x 43cm x 33cm (HxWxD) / 16kg(wood top panel)

Dimensions / Weight 12cm x 43cm x 33cm (HxWxD) / 18kg(Metal top panel)