Setup guide

Appendix 2

Network setting in detail:

DHCP opened / closed and input by hand specifications:

Find the icon in the main interface，and “ network selection ” menu after

entering. Find “ DHCP ” through touching screen or pressing the buttons

and of remote control.

Enter next menu through touching

scrolling or pressing OK button and

select ON.

DHCP has been activated in the factory, and can obtain an IP address

automatically. Please check it if the unit is unable to connect to the internet.

If the router dosen’t open the function of DHCP, you are required to enter the IP

address manually. Specific setting are as follows:

1. Return to the “network selection”

menu and touch up and down arrow

or remote control to enter the IP

setting.