Setup guide

DAC MODE (Only for Reference 7)

The Reference 7 supply working as a DAC support external input from 44.1 KHz to

96 KHz PCM digital signal.

Select the in the center of

main menu click it or press OK

button on the remote control to DAC

mode.

Press the DAC button on the remote

control will into DAC mode also.

The coaxial input is the default input. To select the AES input, switch the

AES/Coaxial selector on the rear panel.

Press the SWITCH button on the remote control or click to switch

optical and coaxial input.

In DAC mode click

or press the button on the remote control the

current playing will be record to USB storage device.

Please check the Appendix 1 recording detail.

NOTE

：

The USB storage device should be FAT32 format.

The DAC button for D-Linear7MK2 was switch the R0~R5 digital filter mode.