Digital music player SAFETY INSTRUCTION To avoid personal injury or damage to equipment, please ensure that you read this manual in its entirety before attempting to operate the equipment. Please retain this manual for future reference. TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT UNDER ANY CIRCUMSTANCES REMOVE ANY PARTS OF THE EQUIPMENT COVER. THERE ARE NO USER SERVICEABLE PARTS INSIDE. ALL SERVICING MUST BE CARRIED OUT BY QUALIFIED SERVICE PERSONNEL.
Power Source The equipment should be connected to a power supply only of the type described in this manual or as marked on the equipment. Grounding or Polarization Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles, and the point where they exit from the amplifier.
Table of Contents Introduction 4--- 6 Fast operating guide 7---17 Appendix 1 18 Appendix 2 19---22 Appendix 3 23---24 Reference7 Specification 25 D-Linear7MK2 Specification 26 Warranty 27 3
Please check the following Appendix ments are complete： n Remote control Reference7 D-Linear7MK2 o Power Cable p Instructions for use q Card reader（For SD card transform） r USB extended wire. （For the USB wireless adaptor and USB storage device both in USB port.） s 802.11N 150M high speed wireless adaptor.
Refenrence7 OPERATING TIPS 1. Power switch 2. LED indicator 3. Display touch screen 4. Remote sensor 5. RJ-45 LAN interface 6. USB HOST ports 7. Coaxial Digital output 8. OPTICAL Digital input 9. Balanced Analog outputs 10. RCA Analog outputs 11. AES Digital input 12. Digital inputs select switch 13. Coaxial Digital input 14. RCA vacuum tube stage outputs 15. Fuse 16.
D-Linear7MK2 GENERAL TIPS 1. Display touch screen 2. USB HOST Port 3. USB HOST jack 4. RJ-45 LAN interface 5. AES digital output 6. Coaxial Digital output 7. RCA analog outputs 8. AC Power connection 9. Fuse 10.
Fast operating guide After turning the player on wait about 30 seconds. The icon interface will show up as per the above picture, with 6 icons in total. Only three icons can be seen each time, they can be switched (moved) simply by touch or remote control and . The icons of this interface indicate the following functions: 1. System settings list or view system properties 2. Play the USB storage device 3. Play the network sharing 4. Internet broadcast 5. My favorites 6.
Play USB storage device Descriptions for each USB port The machine also has USB HOST and the USB DEVICE Interface ports on the rear panel. WARNING NOTE: Do not run both two USB ports at the same time, this can cause a USB failure. Position the on the interface in the middle, then touch it or press the OK button on the remote control to enter the USB mobile storage device file list. If external hard drives disk has files then it will display the file list. Please choose a file.
Click the current selected file name on the screen or OK button on the remote control to play music. The screensaver will be active when music played for 10 seconds. In playing mode, press the RCLL LIST button to recall the file list to select other file to play. WARNING: When the USB storage device is working do not remove the USB storage device or turn off the player.
1. Playing timeline. 2. Recording button: Click this button or press button on the remote control to record the current playing file to the USB storage device (24 bit/96kHz WAV). NOTE: The USB storage device should be FAT32 file system. The FAT32 format operation detail in Appendix 1. Previous button: Click this button or press the button on the 3. remote control, the playing timeline will return to the beginning of the currently playing file.
Single file repeat Folder files repeat; No repeat； Random play； Sequence. NOTE: The DL7 has an internal volume control with screen display, however the Ref 7 does not have a internal volume control but does display the volume bar, please disregard this display if you own the Ref 7. Favorite Favorite type: Playlist, Classical, Popular, Jazz, symphony, Voice, Folk POP, Test Disk, Rock, Country, Dace, Pure music, Soundtrack, Others, General type radio, Recent played radio.
Internet Broadcast To play the internet broadcast you need to setup the network correctly. The Appendix 2 is the network setup guide. This icon means Reference 7 network is connected. Click or press the @ button on the remote control to enter the broadcast list: Region, Type. Press the number button on the remote control to fast select the broadcast in the list. Press the selected name or press the OK button on the remote control to play. The internet broadcast supply clock calibration.
Click the or the button on the remote control to record the current playing internet broadcast to USB storage device. Please check the Appendix 1 recording detail. NOTE ：The USB storage device should be FAT32 format. Net Source To play the network the source needs to be setup correctly. The Appendix 2 is the network setup guide. Setup network share Please check the Appendix 2 network share guide. This icon means Reference 7 network connected well.
Click the roll bar or press the OK button on the remote control to into the samba share, the shared folder computer IP address will be displayed. The Input IP support input the IP address by press the number button on the remote control to visit the shared folder computer. Click ENTER or press OK button on the remote control to connect the computer. After connected the computer shared folder will be displayed. To play the network shared same as the USB storage device.
DAC MODE (Only for Reference 7) The Reference 7 supply working as a DAC support external input from 44.1 KHz to 96 KHz PCM digital signal. Select the in the center of main menu click it or press OK button on the remote control to DAC mode. Press the DAC button on the remote control will into DAC mode also. The coaxial input is the default input. To select the AES input, switch the AES/Coaxial selector on the rear panel.
SETUP Select the in the center of main menu click it or press button on the remote control to SETUP menu. SETUP menu support 7 option, click the option name or press and to select setup option. SETUP OPTION: Network, Brightness, Language, Screen Time, Update, Calibrate, About. Network: Please check the network setup detail in Appendix 2. Brightness: Support 4 levels bright adjustment. Language: Simplified/ Traditional Chinese, English, Deutsch, Japanese, Italy, Russian.
Screen Time: Screen time is the lighting time of the background light,4 options：5 sec, 10 sec, 30 sec and always. Update: The system support firmware upgrade. Please visit http://www.opera-consoncance.com to download the upgrade firmware. How to update: Copy the update_firmware.bin to USB stick root folder. Plug the USB stick to USB HOST port, into the UPDATE menu, the system will upgrade the firmware automatic. DO NOT remove the USB stick or power off the system in the upgrade progress.
Appendix 1 Recording In playing internet broadcast or DAC mode, touch this icon for 2 seconds or long press button on the remote control to record music. The recorded file will be auto named and save into USB storage device. The USB storage device must in FAT32 format, select storage location to record the music. The recorded file will named by date and auto save to Record folder. In the recording progress the screen display font color will been to yellow and the red dot will blink.
Appendix 2 Network setting in detail: DHCP opened / closed and input by hand specifications: Find the icon in the main interface，and “ network selection ” menu after entering. Find “ DHCP ” through touching screen or pressing the buttons and of remote control. Enter next menu through touching scrolling or pressing OK button and select ON. DHCP has been activated in the factory, and can obtain an IP address automatically. Please check it if the unit is unable to connect to the internet.
2. Access to “IP Addr” after entering IP setting menu.(as left picture).Set up IP address through the and of remote control. 3. Return to the previous menu after setting this up and select “Route Addr ”. 4. Set up operation method the same as above after entering “Route Addr”(see right ). 5. Return to the previous menu to select the setting of “Dns Addr”（see left） 6. Enter the setting menu of “Dns Addr” and the operated method same as above.
WI-FI and LAN connection: Plug the wifi module into the USB interface, insert the networking cable into the “LAN” port directly and set up relevant network configuration , then you can use the network functions. To select the “Lan” mode after networking cable of computor insert the “LAN” port directly. If you choose Wi-Fi mode, the wireless network card should be inserted into the rear USB port, restart, and choose the “Wireless”mode in the nettype. Enter into the wireless setting.
Selected the right device. Set up the connected code using the remote control button of ， ， and . Note: To select the number 0~9 and English words with the button of remote control and letters with the button insert next code. ， ， by moving last code or Network state The icon of the main interface right lower corner indicates the network state, including wireless , wired, DHCP, connected,disconnected and so on.
Appendix 3: The remote control must be pointed towards to the receiver window and operated within the range of 30 degrees and 7 meters. Please do not place any visual obstruction between them. Please avoid allowing direct sunlight or florescent lighting to fall directly in the receiver sensor of the unit. Do not mix old and new batteries-two are required, size AAA,LR03 or SUM4.Please take out the batteries if the unit will not be used for a long time. The remote control manual shown below: 1.
11. Next While music is playing, press the key once and it will jump to the next file for broadcasting. Under searching files, to many files displayed, please use the key to page down. Move down the cursor under the network settings and input the password of the wireless network. 12. OK Confirm button 13. Rewind Back one track. 14. Fast Forward Forward one track. 15. Stop Stop playing current files and return to the main menu. 16. Exit Return to the previous page and list operation. 17.
Reference7 Specification 1．24Bit/192kHz digital stream music player. 2．Built-in 24Bit/96kHz recording for digital input and internet broadcast. (needs FAT32 storage device) 3．Built-in over 10,000 global Internet Broadcast stations. 4．Upgradeable firmware through USB memory device. 5．Support play WAV/FLAC/ALAC/ACC etc, digital music format.
D-Linear7MK2 Specification 1．24Bit/192kHz digital stream music player 2．Built-in 24Bit/96kHz recording for internet broadcast. (needs FAT32 storage device) 3．Built-in over 10,000 globe Internet Broadcast 4．Upgradeable firmware 5．Support play WAV/FLAC/ALAC/ACC etc, digital music format. 6．RJ-45 10/100Mbps LAN, support TCP/IP, UpnP, UDP, RTSP, HDCP, PPPoE, HTTP etc, network protocol, support NAS and PC sharing, support MMS, RTSP, HTTP etc, stream media protocol. 7. WLAN: IEEE 802.11 b/G/n，150Mbps 8. 4.
Warranty Opera audio guarantees each product manufactured by us to be free from defects in materials and workmanship under normal use.
