Technical Specifications

ManualsBrandsConco ManualsInterior Paint & StainPro® PURE P100 Interior Acrylic Wall Primer - 1 gal.

Conco® P100 PURE Interior Flat Acrylic Primer is a premium grade, virtually odorless base coat designed for painting

interior commercial, institutional and residential spaces where odor and chemical sensitivities are a consideration.

Conco P100 PURE features excellent hide, seals porous surfaces, and helps reduce odors. This product’s antimicrobial

properties inhibit microbes on the surface, making this an environmentally friendly tool on the job.

P100 PURE PRIMER

PREMIUM GRADE

LOW ODOR INTERIOR FLAT

WHITE

FEATURES

• Premium grade coating designed for interior commercial,

institutional and residential spaces

• Ideal for drywall, plaster and repaints

• Provides excellent hide and s

eals porous surfaces

• Low Odor formula

• Anti-microbial film

• E

asily applied using a brush, roller, or airless sprayer

• S

oap and water cleanup

• Ba

cked by a 100

% Satisfaction Assured Warranty

TECHNICAL DATA

Vehicle: EVA

Finish: 0-5 units @ 85°

Flash Point: N/A

Weight Solids: 52% ± 2%

Volume Solids: 33% ± 2%

Dry Time (@ 77°F and 50% R.H.)

To Touch: 30 Min – 1 Hour

To Recoat: 4 Hours

Weight Per Gallon: 11.61 lb/gal

VOC: <50 g/L – 0.42 lb/gal

as per 40 CFR 59.406

Spread Rate: 300-400 sq.ft. per gallon

(dependent on surface texture and porosity)

Film Thickness: @ 4 mils wet; 1.4 mils dry

Sizes: Gallons, Fives

APPLICATION

RECOMMENDED SYSTEMS

Do not apply at air, surface or product temperatures below 50°F

or when air or surface temperatures may drop below 50°F within

24 hours.

Spray – Airless

Pressure 2000 psi

Tip .017” - .021”

May be thinned up to 1/2 pint of water per gallon of paint spray

application.

Brush

Use a quality nylon/polyester brush.

Roller

Use a 3/8” - 3/4” nap synthetic roller cover.

TIPS FOR BETTER PERFORMANCE

New Wallboard / Drywall

1 coat Conco P100 PURE Interior Acrylic Primer

1 or 2 coats Conco PURE Series Interior Acrylic Paint

Wood

1 coat Conco P100 PURE Interior Acrylic Primer

1 or 2 coats Conco PURE Series Interior Acrylic Paint

Plaster, Masonry (allow to cure for 30 days)

1 coat Conco P100 PURE Interior Acrylic Primer

1 or 2 coats Conco PURE Series Interior Acrylic Paint

Aggregate Block

1 coat Conco P9511 Int/Ext Acrylic Latex Block Filler

1 or 2 coats Conco PURE Series Interior Acrylic Paint

• Stir well before using

• If using more than one package of the same color, mix

toge

ther before applying to ensure uniform color

• Clean the surface thoroughly

• Sand surface smooth to ensure an even surface

• Prepare the substrate to create a uniform surface

• Patch cracks, crevices and trough-w

ll openings using a proper

sealant or patch

• Caulk as needed using a quality latex or siliconized latex caulk

sealant

Summary of content (2 pages)

PAGE 1
P100 PURE PRIMER PREMIUM GRADE LOW ODOR INTERIOR FLAT WHITE Conco® P100 PURE Interior Flat Acrylic Primer is a premium grade, virtually odorless base coat designed for painting interior commercial, institutional and residential spaces where odor and chemical sensitivities are a consideration. Conco P100 PURE features excellent hide, seals porous surfaces, and helps reduce odors. This product’s antimicrobial properties inhibit microbes on the surface, making this an environmentally friendly tool on the job.
PAGE 2
SURFACE PREPARATION CLEAN UP/DISPOSAL WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup.