Operating instructions
AM/FM Reception
It is very important to understand what is shown on the digital readout:
1. Preset Number Indicator
Shows which preset station that has been selected.
2. Band Indicator
Shows which band the radio is tuned to. AM, FM 1, 2, 3 or Weather Band
3. Frequency Indicator
Shows which frequency the radio is tuned.
REMARK:
The radio has been divided into four bands; FM1, FM2, FM3 and AM. There are 9
positions available for each band to preset favorite stations. Each of the three FM
bands are shown as FM1, FM2 or FM3. However, it doesn’t mean the FM has been
divided into three equal frequency ranges.
How to select the Radio Reception Mode
Push the [RADIO] or [BAND] button and the unit will switch to Radio immediately. Or,
push the [FUNCTION] button until [RADIO] shows on the digital readout.
How to preset the desired station to the selected pushbutton
To preset 89.3 MHz at No.6 of FM3 band
The user needs to switch to FM3 band rst and push [UP] or [DOWN] tuning button
to tune to 89.3 MHz. Then pushe and hold the No. [6] button until 6 FM3 89.3 MHz
ashes twice on the digital readout. The station has now been preset
How to recall the preset stations
If one station has been preset at No. 5 position at the band of FM2, and this station
is desired, then push the [BAND] button until FM2 shows on the digital readout, and
then push the No [5] button.
Auto search for an available station
Push [|tt] or [uu|] to auto search or the cluster [tt] or [uu] buttons.for an
available station at a lower or higher frequency near the current station. When this
function is selected, the unit will stay at the selected station until another function is
selected.
Auto Seek through all the ranges of the FM or AM bands
Push the [SETUP] button.quickly and the unit will keep searching until the next
available station from lower to higher frequency is found. When a station is found,
the unit will play it for 5 seconds to let the user have the option of keeping it or not.
When the unit is auto searching, pushing any button will release the unit from this
function.
CONCERTONE
®
10