Instructions / Assembly

Step 14. Place BACK PANEL # 7 on the back of the unit with finished side towards the inside of the unit. Install

BACK PANEL # 7 with screws provided in hardware pack. See Figure 5.

Step 15. IMPORTANT: BACK PANEL # 7 must be completely aligned with RIGHT SIDE # 1, LEFT SIDE # 4,

BOTTOM # 2 and TOP # 3 as well as to ensure a square Literature Organizer. If necessary slightly move

any of the four corners to the left or right to line up with the BACK PANEL # 7. See Figure 5.

Step 16. Together with your friend carefully lift up the unit to its up right position. Attach 7 LABEL HOLDER

CHANNELS to front of 7 HORIZONTAL PARTITIONS. See Figure 6.

Step 17. Place LABELS in desired locations. See Figure 6.

Step 18. Dear customer, for better protection please leave the already attached FELT-PADS under the BOTTOM #

We sincerely hope that you enjoyed assembling your LITERATURE ORGANIZER

and that you will make good use of it.