STORAGE CABINET MODEL No. KT613-3036To ensure that you have a speedy and pleasant time assembling your unit PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE BEGINNING ASSEMBLY. If you need assistance, DO NOT CALL THE STORE, call us. Our Customer Service Group is here to help you. CALL MONDAY-FRIDAY, BETWEEN 8:00AM TO 3:00PM PACIFIC TIME. Please be sure to follow the construction order in the Assembly Manual and complete each step before you proceed to the next step. Call: USA Ply craft Industries Inc. 2100 E.
PARTS a) Top (1 pe.) UNFINISHED THIS SIDE b) Bottom (1 pc.) d) Adjustable Shelves {1 pecs) e) Top Apron {1 pc.) ) Bottom Apron (1 pc.) BB 1) Wood Dowel 1 (16 pea) @ m) Cam lock (12 pea) o R n) Metal Fastener (12 cps) ] o) Shelf Support (4 cps) Page 2 p} Wood Handles (2 cps) ] q) Machine Screw 8/32 X 1" (2 cps) r) Screw 5 X 5/8" (14 cps) Eyre Hinge (4 cps) o) Left Side h) Right Side i} Back Panel i} boors {1 pe.) {1 pe.
Insert 5-Wood Dowels (1) into each Side Panel. : See diagram above, Soft surface £ i : Insert 4-Metal Fasteners {(n) into each Side Panel. See Diagram above.
Step 3 Step 4 TOP UNFINISHED Important Be sure all wood dowels and metal fasteners are located in the opposite holes BEFORE insert the cam locks. (9) Soft surface Page 4 Insert 8-Wood Dowels (1) into Top (a). See diagram above. Insert 4-Metal Fasteners (n} into Top Diagram above. DO NOT OVER TIGHTEN Insert 2-Cam Locks (m) into the large prevailed holes, point the arrow on the Cam in the direction of the side edge. Push the Cam into the hole.
Step 5 Step 6 (m) Insert 2-Cam Locks {m) info the large prevailed holes, point the arrow on the Cam in the direction of the side edge. Push the Cam into the hole. Then use a screwdriver, to turn sate Cam approximately 1/2 turn in the direction of the arrow (clock-wise) to lock it in place. (Applies only on Bottom apron {unfinished back and Top Apron{e). See Diagram above. (m) B Arrow Insert 4-Cam Locks {(m) into the large prevailed holes, point the arrow on the Cam in the direction of the side edge.
Almach Top (a} to the previous sub assembly as shown, Step 7 Insert 4-Cam Locks (m) info the large prevailed holes, point the arrow on the Cam in the direction of the side edge. Push the Cam into the hole. Then use a screwdriver, to turn each Cam approximately 1/2 turn in the direction of the arrow (clock-wise) to rock it in place. See Diagram above. Use the interior packaging foam to [ift the Cabinet to install the Top.
Heep 9 Insert 2 Screws 8 X 5/8™ (t) in each Hinge (s) as shown. See Diagram above, 3 Attach each door with 4-Screws 8 X 5/8" () use per-drilled holes for guide as shown. See diagram Above.
Step 11 Insert 4-helves Support (o) into Side holes in the position you decided then place the Adjustable Shelves {d). See Diagram above. IF NECESSARY ADJUST ONE SHELF SUPPORT BY ROTATING 180° NOTE: For safety, it is recommended to place items on the Storage Cabinet starting with the bottom shelf first working your way up the Cabinet, shelf by shelf to top shelf. As an added safety feature, we recommend to affix the Storage Cabinet to the wall.
Step 12 SECURED TO S, WITH SCREW S SECURED TO TOP OF BOOKCASE WITH SCREW (s) j Young children may be injured by tipping furniture. The use of a tipping restraint is highly recommended. This hardware,when properly installed, could provide protection against the unexpected tipping of furniture due to improper use. WARNING: This product is only a deterrent. Iris not a substitute for proper adult supervision. | Installation Instructions: | 1.
Step 13 Insert 1 Screws 8-32 each Door to install Wood Handle (p) as shown. See Diagram above. There are three adjustments that can be made on a European/cup cabinet door hinge. The two adjustments are: vertical, in-and-out and horizontal. Horizontal + 1.5mm i 4. D] Vertical hinge adjustment via slots in the Horizontal hinge adjustment mounting plate Why change the horizontal adjustment? i ? Wriy@cgisg 2 ) « To close gap between the doors if necessary. Out +2.8mm w\ In-and-Out hinge adjustment Why change th