User manual

ENGLISH
36
9. Recording
Before Recording
Before you start recording with your unit, you can set the record quality. The unit has 3 preset quality
settings, which can be selected with the ‘Quality’ button (31
) on the remote control.
Note:
The unit detects copy protection on the connected source, for example MacroVision protection on
DVD discs. When a connected source is copy-protected, the unit will prevent recording and shows
a warning message when the record button is pressed.
One-Touch-Recording
While watching Live A/V through the unit, you can start a record of the current channel by pressing the
‘Rec’ button (16
) on the remote control. The unit starts recording, until you press the ‘Stop’ button (24)
on the remote control, or until the maximum record time of 6 hours is reached.
When you press the ‘Rec’ button (16
) during a record, the record time will be set to 30 minutes, starting
at the time you pressed the ‘Rec’ Button.
The message ‘OTR+30’ will be shown on your screen.
Press the ‘Rec’ button (16
) again to increase the time with another 30 minutes, up to a maximum of 360
minutes.
The unit keeps recording until the record time is elapsed, or until you press the ‘Stop’ button (24
) on the
remote control.
The recording is stored with a name based upon the record date and time, with the following name:
“MMDDhhmm.AVI” (MM = Month, DD = Day, hh = Hour, mm = Minutes)