User manual

ENGLISH
28
5. Remote Control Explanation
The remote control is used to control the unit. On the inside cover of this manual you will find a picture of
the remote control. The numbers of the buttons correspond with the table below, to explain each function
of the remote control.
Nr Button Description
1. POWER ( ) Turn the unit on or to standby mode
2. INFO Display Channel information / File information
3. SOURCE Switch between AV & Playback
4. AUDIO Change the DVD Audio track
5. TITLE Return to the DVD Title screen
6. 0-9 Menu Navigation / Direct channel entry
7. +10 + 10 Channels
8. EPG < No Function >
9. FAVORITE < No Function >
10. COPY Display the Copy Menu
11. REPEAT Change the Playback Repeat Mode
12. VOLUME
Volume Up
13. VOLUME
Volume Down
14. RETURN Return to the previous screen / channel
15.
, , , Navigation Keys: Navigate through the Menu’s
16. REC Start Recording / Increase Record Time (+30 Minutes)
17. PLAY / PAUSE Start Playback / Pause Playback / Pause Recording /
Initiate Timeshift
18. REWIND (
) Rewind Playback
19. PREVIOUS (
) Previous File / Track / Chapter / Picture
20. OUTPUT Change the Output signal (Composite, Component, S-Video)
21. SETUP Show the Setup Menu on your screen
22. NEXT (
) Next File / Track / Chapter / Picture
23. FAST FORWARD (
) Fast Forward Playback
24. STOP Stop Playback / Stop Recording / Disable Timeshift
25. TIMER Enter the Record Scheduler
26. ENTER Confirm selection
27. STORAGE Change the Active Storage Device (HDD, USB, Card)
28. CHANNEL
Channel Down
29. CHANNEL
Channel Up
30. MUTE Mute the sound
31. QUALITY Set the record quality
32. CLEAR Clear the input / Delete the selection
33. SELECT < No Function >
34. EDIT File Edit Menu
35. 100 + 100 Channels
36. ANGLE Change the DVD Playback angle
37. SUB-T Change the DVD Subtitle
38. DTV – INFO < No Function >
39. DTV – T / R < No Function >
40. MENU Display the Main Menu
41. LED Indicates the operation of the remote control