User manual

96
Diagram 4-11-5
12. How to realize remote control of any device in different network in LAN
 Precondition
 The computers with Winpower must setup TCP/IP protocol in the communication
protocol.
 Steps for realization
 Keep the communication smooth: test with network command “PING” under command
prompt window. For example, a computer named tj2k with IP address 192.168.2.228,
you can test with command “ping 192.168.2.228”. Refer to the following Diagram 4-12-
1, which indicates that the physical link of LAN is smooth.
Diagram 4-12-1