User manual

5
C. If the WinPower is running and you execute the software again then you would see a
message for “Minimize” or “Exit”. The message is also shown as below. If you can see it
then it means that you already execute the software twice.
D. After you start the system and the WinPower is also running in the Traybar, you have to use
“Right Click” on the Green Plug then click on “Start the Monitor “to switch on the main
screen of the software.
E. After step D, you would see the screen is switching on as below message. After it runs to
100% you will see the main screen of the software.
Right Click here then
click on “ Start Monitor “