Webcam User Manual

options to work with motion detection function. Besides the
Alarm Beep, Send Email can be enabled when motion
detected.
The user can define the time interval to Send E-mail.
- Update Firmware
Enter the File Path and click the Update button, the
firmware
will be updated automatically. If you are unsure of the File
path, you can click the Browse button, the Browse dialog
box will appear as illustrated below:
WARNING! During firmware update process, please make sure no interruptions
will occur as it might possibly cause serious damage to the Internet
Camera!
7.2.7. Motion Detection
When you press the “Motion Setting” button, you will get a screen like below, where
you can setup the Motion Detection options of the Camera:
- Invoke Alarm
If you enable this option, a notification sound will be heard
through the speakers of the computer when the camera
detects motion.
- Send Email
When enabling this option, the Camera can send you an
Email Message notifiying you about the motion.
- Sensitivity Level
You can adjust the sensitivity level of the Camera by moving
this slider from left to right.