User manual

ENGLISH
74
16. UPnP A/V Server (Twonky Mediaserver)
One of the features of the Media Giant is the UPnP A/V Server.
This makes the Media Giant and all its media content available for UPnP A/V clients in your network (for
example: the Conceptronic CFULLHDMA or the Conceptronic C54WMP).
The used UPnP A/V Server in the Media Giant is ‘Twonky Mediaserver’.
The Twonky Mediaserver automatically indexes all the media on the FAT32 and NTFS media partition. When
new data is added to one of these partitions, it will become automatically available for UPnP A/V clients in
your network.
The name of your UPnP A/V Server can be set in the Setup menu of the Media Giant, at the ‘Network’
section.
Note:
The default name of the UPnP A/V Server is ‘media giant’.
If you are familiar with the Twonky Mediaserver software, you can change the advanced Twonky
Mediaserver settings through your computer.
To access the configuration pages of the Twonky Mediaserver software, enter the IP address of the Media
Giant in your browser window, followed by the portnumber 9000.
For example:
HTTP://192.168.0.100:9000/ (assuming that 192.168.0.100 is the IP address of your
Media Giant).
The Twonky Media Server has a built-in ‘Troubleshooting’ guide, which can be found in the left navigation
bar of the Twonky Media Server configuration window. This guide will help you with the configuration of
the Twonky Media Server.
For more information of the Twonky Media Server, visit the Twonky website at:
http://www.twonkymedia.com/