User manual

ENGLISH
57
Copy mode
If you want to copy data from 1 location to another location (for example: from a USB device to the
internal harddisk), you can use the Copy mode of the Media Giant.
To access the Copy mode, press the ‘Copy’ button (7
) on your remote control when you are in the media
browser. The Copy menu will be shown on your screen:
[ Copy menu ] [ Copy menu – Copy Wizard ]
You can select between ‘USB’, ‘Harddisk’ or ‘Network’ as source for your copy. The available desinations
are ‘USB’, ‘Harddisk’ and ‘Recycle’ (delete files).
First select the source by pressing the up and down navigation buttons (15
) on the remote control. When
the correct source is selected, press the right navigation button (15
) and use the up and down navigation
buttons (15
) to select the destination.
Note:
You can see by the highlighted border if the Source or Destination section of the Copy menu is
active.
Note:
It is not possible to copy from ‘USB’ to ‘USB’, or from ‘Harddisk’ to ‘Harddisk’.
• When the source and destination location are correct, press the ‘Enter’ button (26
) on the remote
control to proceed with the Copy Wizard.
• Navigate through your source until you have found the files or folders you want to copy. You can
navigate through the folders with the navigation buttons (15
) and the ‘Enter’ button (26) on the remote
control.
• Mark the files or folders you want to copy with the ‘Play’ button (18
) on the remote control. The
marked files or folders will show a marked icon behind the name.
• When the source files or folders are marked, press the right navigation button (15
) on the remote
control to switch to the destination section.
Note:
It is not possible to select the NTFS media partition of the Media Giant as destination, since it is
not possible to write on the NTFS media partition.
• Navigate through your destination until you have found the correct copy location. You can navigate
through the folders with the navigation buttons (15
) and the ‘Enter’ button (26) on the remote control.
• When the correct location is found, press the the right navigation button (15
) on the remote control to
start the copy process.