User Manual Wireless Pan & Tilt Camera CIPCAMPTIWL v1.
CIPCAMPTIWL User Manual Index 1 2 3 INTRODUCTION................................................................................................................ 4 1.1 THE PACKAGE INCLUDES ................................................................................................. 4 1.2 FUNCTION AND FEATURES ............................................................................................... 4 1.3 TECHNICAL SPECIFICATIONS ..............................................................
CIPCAMPTIWL User Manual 5.4.1 Device Information ................................................................................................ 20 5.4.2 Time Setting .......................................................................................................... 20 5.4.3 Firmware upgrade ................................................................................................. 20 5.4.4 Restore Factory Default ...............................................................................
CIPCAMPTIWL User Manual 1 Introduction The Wireless Pan & Tilt Camera combines a high quality digital video camera with network connectivity and a powerful web server to bring clear video to your desktop from anywhere on your local network or over the Internet. 1.1 The package includes Conceptronic Wireless Pan & Tilt Camera Product CD-ROM Network cable Power adapter Replaceable antenna (1x) Multi language quick guide 1.
CIPCAMPTIWL User Manual Assistant Video and Audio Network Other Features Hardware Interface Physical Index Software(PC Side) Lighting 10pcs 850nm Infrared LEDs, 5m distance Lighting Control Auto control Resolution 640*480(VGA)/320*240(QVGA)/160*120(QQVGA) Compression MJPEG Frame rate 30fps Bit rate 128kbps ~ 5Mbps Image Rotation Mirror /Flip Audio Compression ADPCM Basic Protocol TCP/IP、UDP/IP、HTTP、SMTP、FTP、DHCP、 DDNS、UPNP、NTP、PPPOE Other Protocol 802.
CIPCAMPTIWL User Manual 2 Appearance and Interface 2.1 Appearance Figure 1 Status Indicator: the green light is to show that the device is running Slow flicker(one per 2 second): indicates the device is searching for network Flicker(one or twice per second: indicates the wired network connected Frequent flicker(2~3 times per second): indicates wireless network connected. 2.
CIPCAMPTIWL User Manual 3 Visit the Camera from LAN 3.1 LAN connection Figure 3 3.2 Search and set the IP address of the Camera Run “BSearch_en.exe” in the CD, the setting interface as figure 4. Figure 4 Operation Steps: 1) Click “Search (F3) 2) Choose the device 3) Change the IP address of camera according to the information in the red frame on the left. The numbers in the red circle should not be the same.
CIPCAMPTIWL User Manual After successfully updatong, click “Search (F3)”, choose the device and click “Browse (F4)”. Then you may view the camera, like figure 5. NOTE: 1) If you don’t know how to fill out the content of “IP config”, you could also tick the “Set IP automatically” to get the IP address from the router automatically. 2) If you have the firewall software in your PC, when you run the BSearch_en.
CIPCAMPTIWL User Manual Figure 7 1) Main Menu The main menu includes the function setting of different submenu 2) Status Displaying Area In right up corner, it is the status displaying area, to show the 9 devices’ status: if not connected, button is gray if connected, button is green If wrong connected , button is yellow If alarm , button is red 3) Multi Channel displaying area If users add multi channel（refer to 5.3.2）, when shift to 4-Ch, 9-CH, and it will automatically show other devices.
CIPCAMPTIWL User Manual Figure 8 4) PT and video control In Pan/Tilt control area, user can control the position according to the arrow sign: up, down, left, right, middle, horizontal cruise, vertical cruise, and stop etc. Means open IO output and Close IO output. User can also set the device frame rate、resolution, brightness, contrast and other parameters. 4 Visit IP Camera from WAN 4.
CIPCAMPTIWL User Manual 4.2 Port forwarding If visit IP Camera from WAN, you must do port forwarding on the router. Take Netgear router for example.
CIPCAMPTIWL User Manual Figure 11 4.3.2 Third Party DDNS User can also use third part DDNS, such as www.dyndns.com User must apply a free domain name from this website and fill the info into the below blanks (Figure 12) and save the settings. Then the domain name can be used. Figure 12 Note: Using the third party domain name, if the http port is not 80, the port number should be adding to the domain name with colon. Example: http://btest.dyndns.biz:81. N. 5 Other Settings 5.1 Network Setting 5.1.
CIPCAMPTIWL User Manual Figure 14 Note1: When the device is connected both WiFi and wired, it will firstly connect to the wired network, if it can’t connect to it, then it will change and connect to WiFi. The IP address and port is the same, either wireless or wired network. Note2: Before you start the configuration of wireless as shown above; please make sure the device is connected to the network via network cable. After settings succeed, please reboot the device and wireless function takes effect. 5.1.
CIPCAMPTIWL User Manual with the equipment, if not, we would suggest you to disable this function and do the port-forwarding manually. 5.1.5 DDNS Setting Please refer to the content in 4.3. 5.1.6 MSN Setting Figure 17 User needs to apply for a MSN account for this device first, for example: test1@hotmail.com. Please put this MSN account and its password as above Figure 17. Then put your MSN account, for example: friend1@hotmail.com, into the ‘MSN Friends List. Then on your friend1@hotmail.
CIPCAMPTIWL User Manual Figure 18 2） Alarm Action All kinds of alarm modes: IO interface for alarm signal output: when relay is switched on, the external alarm will begin to alarm. Send alarm info by email. Send the site pictures to the FTP server, user can also set the break time between two pictures. Send alarm info to the alarm server. 3） Scheduler Device will trigger alarm in scheduled time. User can set schedule time to be “all the time”.
CIPCAMPTIWL User Manual Figure 19 5.2.
CIPCAMPTIWL User Manual The device will send alarm email to you. You only need to fill out the blanks with your email address as shown in Figure 20. After the setting, please click save and test to check if it works properly. If it is properly set, user can tick to enable “Report Internet IP by mail”. After every restart, the device will send its Internet IP address to user’s email address. 5.2.
CIPCAMPTIWL User Manual userpwd=password& rea=alarm type (1=Motion Detection, 2 =Alarm from Alarm in port)& io=0 Alarm server needs developing by user. User can extend other functions on this server, like SMS, MMS alarm, and mobile phone etc. 5.3 Advanced 5.3.1 User Setting There are three levels of authority; they are Administrator/Operator/Visitor. Administrator have the highest authority, it can do any change to the settings.
CIPCAMPTIWL User Manual As Figure 24, User can maximum add 9 devices to view the device simultaneously. Click refresh button to check the device in the LAN. When click the device, will popup setting dialogue box and input the device info, as figure 25 and click save. After that, must click submit button to save. Figure 25 5.3.3 Other settings You can choose open or close indicator LED. If set PTZ center on start ‘Yes’, when start device, Pan/Tilt will move to center and then stop.
CIPCAMPTIWL User Manual 5.4 Maintain 5.4.1 Device Information Figure 27 5.4.2 Time Setting If the device is connected to the Internet, you enable the NTP server to correct the time and select the right time zone. Or you should use the PC’s time to correct its time. Figure 28 5.4.3 Firmware upgrade The device runs 2 kinds of programmer, one is system firmware, the other is application firmware. They could be upgraded separately. Figure 29 5.4.
CIPCAMPTIWL User Manual 5.4.5 User browsing Log After enter the log interface, you could view who and when the device is visited. Figure 30 6 Centralization Control Figure 31 IPCMonitor is a free software offered by factory, several devices on LAN and WAN can be browsed at the same time. The software also supports snap, video record, alarm and so on. The below Figure 31 is the interface. For more information, pls. refer to the <> in CD.
CIPCAMPTIWL User Manual 2) Slow browser speed This equipment adopts MJEPG compression format, it needs large network bandwidth, the narrow bandwidth will affect the browse speed. The typical bandwidth uses situation as below: 640x480@10fps : 4.0 Megabits ～ 5.0 Megabits 320x240@30fps : 1.2 Megabits ～ 1.6 Megabits 3) Color difference The default is infrared lens, when visit outdoor or strong infrared light scenes, there are color differences, the color is not accordance to the real scenes.
