User manual

ENGLISH
67
Browse Router Port
This displays which of the Switch’s ports are currently configured as router ports. A router port configured by a user
(using the Web-based management interfaces) is displayed as a static router port, designated by S. A router port
that is dynamically configured by the Switch is designated by D.
Figure 10- 3. Browse Router Port window
Port Access Control
The following windows are used to monitor 802.1x statistics of the Switch, on a per port basis. To view the Port
Access Control windows, open the Monitoring folder and click the Port Access Control folder.
NOTE: The Authenticator State, Authenticator Statistics,
Authenticator Session Statistics and Authenticator Diagnostics
windows in this section cannot be viewed on the Switch unless 802.1x is
enabled by port or by MAC address. To enable 802.1x, go to the Switch
802.1x entry in the Web Management Tool.
RADIUS Authentication
This table contains information concerning the activity of the RADIUS authentication client on the client side of the
RADIUS authentication protocol. It has one row for each RADIUS authentication server that the client shares a
secret with. To view the RADIUS Authentication, click Monitoring > Port Access Control > RADIUS
Authentication.
Figure 10- 4. RADIUS Authentication window
The user may also select the desired time interval to update the statistics, between 1s and 60s, where “s” stands
for seconds. The default value is one second. To clear the current statistics shown, click the Clear button in the
top left hand corner.