User manual

ENGLISH
59
QuietPeriod This allows you to set the number of seconds that the Switch remains in the “Held” state
following a failed authentication exchange with the client. The default setting is 60
seconds.
SuppTimeout This value determines timeout conditions in the exchanges between the Authenticator and
the client. The default setting is 30 seconds.
ServerTimeout This value determines timeout conditions in the exchanges between the Authenticator and
the authentication server. The default setting is 30 seconds.
MaxReq The maximum number of times that the Switch will retransmit an EAP Request to the
client before it times out of the authentication sessions. The default setting is 2.
ReAuthPeriod A constant that defines a nonzero number of seconds between periodic reauthentication
of the client. The default setting is 3600 seconds.
ReAuth Determines whether regular reauthentication will take place on this port. The default
setting is Disabled.
Click Apply to implement configuration changes.