User manual

ENGLISH
34
Static VLAN Entry
In the L2 Features folder, open the VLAN folder and click the Static VLAN Entry link to open the following
window:
Figure 7- 4. Static VLANs Entry Settings window
The 802.1Q Static VLANs window lists all previously configured VLANs by VLAN ID and VLAN Name. To delete an
existing 802.1Q VLAN, click the corresponding
button under the Delete heading.
To create a new 802.1Q VLAN, click the Add button in the 802.1Q Static VLANs window. A new window will
appear, as shown below, to configure the port settings and to assign a unique name and number to the new VLAN.
See the table below for a description of the parameters in the new window.
Figure 7- 5. 802.1Q Static VLANs window - Add
To return to the Current 802.1Q Static VLANs Entries window, click the Show All Static VLAN Entries link. To
change an existing 802.1Q VLAN entry, click the Modify button of the corresponding entry you wish to modify. A
new window will appear to configure the port settings. See the table below for a description of the parameters in
the new window.