User manual

ENGLISH
28
To add or edit an entry, define the following parameters and then click Add/Modify:
Parameter Description
VID The VLAN ID number of the VLAN on which the above Unicast MAC address resides.
MAC Address The MAC address to which packets will be statically forwarded. This must be a unicast
MAC address.
Port Allows the selection of the port number on which the MAC address entered above
resides.
Click Apply to implement the changes made. To delete an entry in the Static Unicast Forwarding Table, click the
corresponding X under the Delete heading.
Multicast Forwarding
The following figure and table describe how to set up Multicast Forwarding on the Switch. Open the Forwarding
Filtering folder and click on the Multicast Forwarding link to see the entry window below:
Figure 6- 13. Multicast Forwarding Settings window
The Static Multicast Forwarding Settings window displays all of the entries made into the Switch's static multicast
forwarding table. Click the Add button to open the Setup Static Multicast Forwarding Table window, as shown
below:
Figure 6- 14. Setup Static Multicast Forwarding Table window