User manual

ENGLISH
27
Multiple Image Services
To configure the files located on the Flash memory, use the following windows to guide you.
Firmware Information
This window is used to view boot up firmware images.
Figure 6- 10. Firmware Information window
Config Firmware Image
The following window is used to determine which of the two firmware images will be used as the default boot file.
You can also delete either of the two images.
Figure 6- 11. Config Firmware Image window
Forwarding & Filtering
Unicast Forwarding
Open the Forwarding Filtering folder in the Configuration menu and click on the Unicast Forwarding link. This
will open the following window:
Figure 6- 12. Unicast Forwarding window