User manual

ENGLISH
18
Section 6
Administration
• IP Address
• Port Configuration
• User Accounts
• Port Mirroring
• TFTP Services
• Multiple Image Services
• Forwarding & Filtering
Device Information
This window contains the main settings for all major functions for the Switch and appears automatically when you
log on. To return to the Device Information window, click the CB 100S48S Web Management Tool folder. The
Device Information window shows the Switch’s MAC Address (assigned by the factory and unchangeable), the Boot
PROM, Firmware Version, and Hardware Version. This information is helpful to keep track of PROM and firmware
updates and to obtain the Switch's MAC address for entry into another network device's address table, if necessary.
The user may also enter a System Name, System Location and System Contact to aid in defining the Switch, to the
user's preference. In addition, this window displays the status of functions on the Switch to quickly assess their
current global status. Some functions are hyper-linked to their configuration window for easy access from the
Device Information window.
Figure 6- 1. Device Information window
The fields that can be configured are described below:
Parameter Description
System Name
Enter a system name for the Switch, if so desired. This name will identify it in the Switch
network.
System Location Enter the location of the Switch, if so desired.
System Contact Enter a contact name for the Switch, if so desired.