User manual

ENGLISH

First Time Connecting to the Switch

The Switch supports user-based security that can allow you to prevent unauthorized users from accessing the

Switch or changing its settings. This section tells how to log onto the Switch.

NOTE: The passwords used to access the Switch are case-sensitive; therefore, "S" is

not the same as "s."

When you first connect to the Switch, you will be presented with the first login screen.

NOTE: Press Ctrl+R to refresh the screen. This command can be used at any time to

force the console program in the Switch to refresh the console screen.

Press Enter in both the Username and Password fields. You will be given access to the command prompt

CB100S48S:1# shown below:

There is no initial username or password. Leave the Username and Password fields blank.

CB100S48S Fast Ethernet Switch Command Line Interface

Firmware: Build 1.00-B11

UserName:

Password:

CB100S48S:1#

Figure 4- 2. Command Prompt