System information

P6
1.Front panel and rear panel
 The key function specification in the front panel and the interface specification in the real panel
are in the specification.
 Please check the product type in the front panel whether is accordant with the product type you
order.
The label in the real panel is very important for the after service. Please protect it carefully. When
you contact us for after service, please provide the product type and serial number in the label.
2.Check
After open the cover, you should check if it has obvious damage trace, also please check the front
panel data cable, power cord and motherboard's connection are loose or not.
2.2 Hard disk installation
For the first use, please install the hard disk, this machine box can install one or two hard disk(no
limited capacity).
①disassemble the screw ②disassemble the cover ③fix the screw of hard disk
④fix the screw of hard disk ⑤connect the data wire ⑥connect the power wire
⑦cover the machine ⑧fix the cover