User manual

45
Capture
Capture the current image (the default save path: the default
pictures directory of mobile).
full screen
Picture full-screen
add
add device
delete
Delete device
modify
Modify device
Switch pictures on Imac platform，click view->scream mode on the top of the screen to switch pictures from 1/4/9/16，as the following figure shows:
picture switch
First login ,preview interface is empty, need to set parameters and add device,after adding device, can preview, configuration, modify or delete equipment information
ect.
click “add ”,pop-up a message box as shown in the follong figure:
add device
The current message box shows the need to enter five information: device name、IP address、port、user ID and password.
Device name:the name of monitor device,help you distinguish between multiple devices
IP address：The public IP address or dynamic domain name of DVR(here the address must be internet address)
port：The mobile phone port set in DVR，default parameter is 8888
User name：default username usually to be ‘admin’,can be set according to the DVR .
Password：:admin user’s default password is empty，can be set according to the DVR.