User manual

39
2.Then select Add button and enter device add interface, as shown in the above image.
Notes:
<Device Name>：It is convenient to distinguish between multiple devices.
<Address>：The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapped before using public IP and mobile phones need to
open wifi before using LAN IP).
<Port>：The mobile phone port set in DVR（default parameter is 8888）.
<User ID>：The username permitted to login the DVR（default username is ‘admin’）.
<Password>：The password of the user (default password is empty).
<Max Channel>：The actual channel number of DVR.
3.After finishing, click <OK>, enter <Device Manage> interface. As shown in the below image.
4.In the <Device Manage> page, click the <back> button, enter the <add channel> interface, then click the <+> button , as shown in the above image.
5.Click the <+> button , and switch automatically to <Device List>, as shown in the below image.
6.Click the button to view all channel numbers, as shown in the above image.
7.Double click any channel, then switch to the <channel preview> interface to preview channels, it can support four channels previewing at the same time, as shown
in the below image.