User manual

17
【Channel】Choose the need to install passage "whole" says setting all channels.
Each longitudinal row of every seven days a week, said the 24 hours a day manipulated said, mouse the left key click on the small square footage, setting time to
clean it has chosen right-click drag video time.
4.2 Camera
When the system starts the camera will detect the format of video
(1) PTZ Setup
【Channel】Choose regional channels, yuntai Settings "whole" says setting all channels
【PTZ Protocol】Yuntai equipment communication protocol
It contains these options:Pelco_D、Pelco_P、LILIN、MINKING、STAR、VIDO、NEON、DSCP、HY、N-control、RM110、SAMSUNG，the default option is Pelco_D.
★Note: yuntai parameter Settings every channel need after completion in Settings of gc1318 alone.
【PTZ Address】Yuntai equipment address, digital range 0 to 255.
★Note: here with the address must be consistent ball machine address, we can't control the ball machine.
【Bit-rate】Yuntai equipment baud rate.
(2)Video Setup
【Video Mode】Provide PAL and NTSC both formats video formats choice, modify after you must restart your system can take effect.
【Channel】Choose to set the video Settings area passage "whole" says setting all channels
【Reserved Section】Click Settings enter. The white areas for privacy area
【Buzzer Alarm】Happen when video lost choice whether or not to allow buzzer warning
【Alarm Output】Happen when video lost upcoming linkage selected channel corresponding alarm output
(3)Motion Detection