8-Channel CCTV Surveillance Kit User Manual C8CHCCTVKIT V1.
CONTENTS Chapter one Products Introduce ................................... 4 1.1 Technical Parameter .......................................................... 4 1.2 Product overview ................................................................ 4 1.3 Key Features ...................................................................... 4 Chapter Two Hardware ............................................... 5 2.1 H.264 standalone DVR .......................................................
4.3 Network Setup .................................................................. 18 4.4 System Setup ................................................................... 21 4.5 System Management........................................................ 23 Chapter Five IE Preview ............................................ 25 5.1 logging on interface ........................................................ 25 5.2 System Settings................................................................ 26 5.
Power This DVR adaptor is DC12V; please make sure the power supply voltage before turn on the machine. If long time do not use the machine, please turn off the power of DVR machine, and let the electric plug away from power socket; 2. safety This DVR only for indoor use, as for prevent short circuit or electric danger, please do not let the DVR in the raining or humid area.
Chapter one Products Introduce 1.1 Technical Parameter Compression standard H.264 baseline profile@L3.1 Video input Composite 1.0Vp-p/75Ω, BNC×8 Video output Composite 1.
Chapter Two Hardware 2.1 H.264 standalone DVR 2.1.1 Hard disk Installation For the first use, please install the hard disk 1 Remove the screws on both ○ 4 connect the power wire ○ 2 extracted from the next cover up ○ 5 fix the screw of the hard disk ○ ⑦close cover 3 connect the data wire ○ 6 fix the screw of the hard disk ○ ⑧fix the cover 2.1.
Rear panel Item Interface 1 VIDEO IN 8ch video input Description 2 AUDIO IN 8ch audio input 3 V-OUT 1ch video output 4 A-OUT 1ch audio output 5 VGA ６ HD-OUT ７ NETWORK ８ USB ９ ON/OFF Power supply switcher １０ DC-12V Power adaptor port VGA monitor HDMI interface RJ45 First USB for backup or upgrade system of DVR; Second USB for mouse １１ ALARM IN：IN1-IN4 alarm input port RS-485：A , B ALARM OUT: N1 alarm output port, every channel connect GND、OUT、COM; every two channel OUT, COM por
4 way switching value alarm output, selectable in normally open contact, also selectable in normally closed contact, the external alarm device should be need Vcc; 7
Chapter Three Operation 3.1 Operation instruction 3.1.
to move in the PTZ control windows 【REC】 7 【SEARCH】 To mode of recording Search for choosing playback 16 【CLEAR】 Clear alarm time 3.1.
Button Description Button Main Menu Description PTZ control Wizard language Alarm control Multi channel Display setup Recording Control Playback Back up Exit If before starting, the system not to install hard disk, into the system, will tip: system didn't detect any hard disk connection! Note: In this dialog you can select language and quickly set various of parameters. 3.3 Shutdown There are two safety mode for Shutdown Enter【Exit】,select【Power Down】.
recording). Directly to pull up the power cable of DVR While the DVR running, directly to pull up the power cable of DVR, please avoid as much as possible to do it. (specially while the DVR recording). Caution: In some area, the power supply is irregularity, it will cause the DVR working not normal-operation, the DVR will be damaged in serious. In this surroundings, suggest select the stabilized voltage supply. 3.4 Multi Channel 1/4/8/9preview screen mode switch 3.
3.7 Playback video Button Description Button Synchronous/asynchronous play frame by frame Description Voice adjustment 1/4/8/9screen(switch image) Speed slow Hide / display list Speed normal recording date Speed fast Play/pause/stop Sound off/on rewind Note: 1) During playback the Playback Tool will show the file playback speed, channel, timing, playback speed etc.
3.8 How to control PTZ 【Zoom】Lens in the current play far closer picture, use the mouse wheel also can undertake variable times control. 【Focus】Slight adjusting the focal length 【Iris】Aperture size adjustment 【Speed】Through the slider adjust rotation stepinterval, yuntai mainly used to control direction operation, the step length of turning the faster yuntai.
3.9 Alarm control 【Set Alarm】Selection need protection channel, click confirm corresponding channel after in protection status 【Clear Alarm】Remove protection condition, not alarm input to react 【Alarm Output】Open the alarm output.In the premise of no trigger alarm input,user can operate the output.for example, some alarm switch is connected with a lamp,lamp is open when alarm is trigered 【All】Can choose all the channels 3.10 Display Adjust (1)Video 【Video Effect】Optional: standard, downy, sharp, custom.
【Device】The first generation of DVR’s optional: VGA output, TV output etc display output devices, the system may support multiple equipment and output. The second generation of DVR’s optional:VGA Output+HDMI Output、TV Output. 【Resolution】Setting the resolution of the display device.
Chapter Four Menu Operation Guide 4.1 Recording Setup (1) Recording Setup 【Channel】Choose the need to install passage "whole" says setting all channels. 【Image Size】CIF/HALF D1/D1,if the model is 960H,the encoding format maybe is 960H/D1/CIF,if the model is 1080P,the encoding format maybe is 1080P/720P, different models,different encoding format 【Encoding Mode】Including fixed bitrate, dynamic bitrate. 【Image Quality】Client-side image quality, the higher the quality the clearer.
【Channel】Choose the need to install passage "whole" says setting all channels. Each longitudinal row of every seven days a week, said the 24 hours a day manipulated said, mouse the left key click on the small square footage, setting time to clean it has chosen right-click drag video time. 4.
【Channel】Choose need to set up mobile testing area passage "whole" says setting all channels 【Sensitivity Setting】Can be set to give: minimum, low, general, high, highest 【Detection Area】Click Settings enter. Green area for dynamic test, grey areas design.ferroconcrete-brick undefended area for. Press the mouse left key to drag on the lower detection area to the right, press the mouse button clearance.
Tip: PPPoE dial-up successful, according to 【 PPPoE IP 】 shown on IP address, users can remote access hard disk video recorder. By nic LAN IP access. The dvr support model： Unicom：huawei E173,zhongxing MF100 Telecom:huawei EC150.huawei EC156.zhongxing MF583 “3G DIAL” have two modes with automatic and manual dialing, the operation follows as below. 1.
【DDNS Domain】Dynamic domain name, soft keyboard and hard keyboard can be input. 【DDNS Account】Login domain name service provider website user name 【DDNS Password】Login domain name service provider website password Tip: through the dynamic DNS server. Support dynamic DNS. (4)Email 【SSL Protocol】Sending E-mail in use safety network connection 【Test Email】Send an email to the recipient mailbox test 【Email Address】The recipient's email address. Users can input two different email address.
4.4 System Setup (1)Time 【System Language】Used in a remote remote device control more hard disk video recorder occasions, only in remote controls address and hard disk video recorder Numbers identical to remote operation. 【Device Number】According to the requirement to select the time zones, has twenty six time zone for user Settings. 【Time Zone】Select the format the date is displayed in including date, sun and moon June 21 years in three formats.
【User】Characters in length up to 8 bytes, ignore trailing Spaces. Can be letters, Numbers, and other symbols. The user has the largest number of eight, user name may not be repeated. 【User Rights】According to the requirements set of functions need checked 【Add User】Input need to add user, and input the account password and passwords. According to save button to add user.
【Buzzer Output】In the chosen time intervals have alarm input will start buzzer output. 【Send Email】In the chosen time intervals have alarm input which will send relevant information, such as the alarm events, paparazzi pictures, equipment name, device ID, etc sent to user specifies the mailbox. 【Alarm Output】In the chosen time intervals have alarm input will start alarm output (6)Margin Adjust By the function, you can adjust the distance between the display device and the picture edge. 4.
Upgrade was successful, and the screen appears to restart operating hints. Equipment reboot after system that will enable the new software. (2)Log Search 【Date Search】Can search according to date 【Log Type】Optional: all, operation log, set diaries, alarm log, error log Note: according to the left, right arrow can move forward and content. (3)Default Restoring default can restore selected according to need.
【Exception Type】Choose abnormalities: hard disk full, hard disk errors, network connection. 【Buzzer】When abnormality, choose whether to allow the buzzer hints. Chapter Five IE Preview 5.
Pretermission IP address is 192.168.0.20 5.2 System Settings Point , As the picture ,You can set up language directory,After all to save you set.
27
5.
29
Chapter Six Asee series phone software for use 6.1 Asee This module has mainly instructions on the installation and usage in Android, Blackberry, iPhone mobile phone. 1) The acquisition of client software: The client software can be got from the CD material equipped with CD , then choose English and select the options supporting tools, finally choose the mobile phone monitoring or obtained from technical support. Each type of corresponding client software as follows. 1. Asee.
2. Install offline Copy the Asee.apk installation package to Android phone through cable. In the specified directory find out the corresponding .apk, click the application installation (If there is not installed apk installer in the mobilke phone, the user needs to download an apk installation software so that it can identify the apk package), and there will be program icons after finishing installing. As the above image shows.
Next group It can show the next channels group. Choose one video channel of the device. And cooperate with "next Select channel group" can switch the 8 or 16 channels. PTZ control PTZ direction control including up, down, left and right. Zoom Zoom in/out control of PTZ. Focal length Focal length adjustment of PTZ. Aperture Aperture control of PTZ.
Notes： ：Back to the screen of previewing image. ：It shows the corresponding DVR and the default channel list, the user can arbitrarily choose a channel to preview image. ：Click this button and enter the “Settings” interface, you can editor delete the device information, as shown in the above image 6）Complete settings, choose channel to preview, and the preview function include two modes: common mode and full screen mode. 1.
6.1.2 Instructions of Blackberry 6.1.2.1 Essential condition 1) Support the version 4.6 or above of Blackberry system, and mobile phone screen resolution is 480*360 and 480*320. Support 8900, 9000, 9700, 9630, 9900 of Blackberry. 2) Support DVR platform versions: Hisilicon v1.0.1.8 and higher. GRain v8.33 and higher§2.2 Installation and operation instructions 6.1.2.2 installation 1）Install ASee. cod and ASee.
Notes：
：It is convenient to distinguish between multiple devices. ：The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapping before using public IP and mobile phones need to open wifi before using LAN IP). <port>：The mobile port set in DVR（default parameter is 8888）. <channel total>：The actual channel number of DVR. <user id>：The username owens view permissions of mobile phone（default username is admin）.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/conceptronic/c8chcctvkit/user-manual-english/page-37.html>PAGE 37</a></h6><p>Capture the current image (the default save path: the default pictures Capture directory of mobile) About Next group Some device information of the software. It can select the next channels group (1-4、4-8、8-16) or PTZ control. Choose one video channel of the broadcasting device and select any Select channel one of 8 channels. Up control of PTZ Down control of PTZ Left control of PTZ Right control of PTZ The up direction control of PTZ. The down direction control of PTZ.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/conceptronic/c8chcctvkit/user-manual-english/page-38.html>PAGE 38</a></h6><p>The corresponding functions of buttons in < device edit> interface show as follows: Menu definition Function specification Set to real-time preview New Device When the program connects with device, play video. Create a new record. Edit Edit record. Delete Delete the selected record. Delete All Records Shutdown Delete all records. Shut down the program. 6.1.3 Instructions of iPhone 6.1.3.1 Essential condition 1) Support the version iOS 3.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/conceptronic/c8chcctvkit/user-manual-english/page-39.html>PAGE 39</a></h6><p>Function keys Definition Function specification Stop When the program disconnects with device, stop playing the video. playing Capture the current image (the default save path: the default pictures Capture directory of mobile). Set some information of the device, such as IP address, dynamic domain Settings name, port, username, password and device alias information. Channels group switch About It can switch to next channels group. Some device information of the software.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/conceptronic/c8chcctvkit/user-manual-english/page-40.html>PAGE 40</a></h6><p>2.Then select Add button and enter device add interface, as shown in the above image. Notes: <device name>：It is convenient to distinguish between multiple devices. <address>：The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapped before using public IP and mobile phones need to open wifi before using LAN IP). <port>：The mobile phone port set in DVR（default parameter is 8888）. <user id>：The username permitted to login the DVR（default username is ‘admin’）.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/conceptronic/c8chcctvkit/user-manual-english/page-41.html>PAGE 41</a></h6><p>8.Click the <settings> button enter the <device manage> interface, as shown in the above image. The user can edit, modify and delete device information by clicking the corresponding icon or slipping the item. （1）Click the <edit> button （2）Slide rightly the <edit> button enter <parameter modifying> interface, as shown in the below image. to delete the information. As shown in the above image.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/conceptronic/c8chcctvkit/user-manual-english/page-42.html>PAGE 42</a></h6><p>common mode full screen mode 5）Channel switch function Select some channels in the Device list interface, the program will automatically switch to the Preview Interface and open the corresponding channel preview in Preview Interface. Program displays the default 1 ~ 4 channels, when elected the channel <channel switch> button in the <preview interface>, the channels group will switch to 5 ~ 8, 8 ~ 12, 12~16 and circulation switch. As shown in the below image. 6.1.4 Instructions of Symbian 6.1.4.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/conceptronic/c8chcctvkit/user-manual-english/page-43.html>PAGE 43</a></h6><p>click PTZ show as the following figure The functions of buttons show as follows: Function keys Definition Play/pause Function specification When the program connects with device, play video Capture the current screen(the default save path: the default pictures directory capture of mobile) Set some information of the device, such as IP address, dynamic domain name, settings port, username, password and device alias information. Full screen pervious/next exit For this channel full screen.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/conceptronic/c8chcctvkit/user-manual-english/page-44.html>PAGE 44</a></h6><p>PTZ control zoom Focal length Aperture PTZ direction control including up, down, left and right. Zoom in/out control of PTZ. Focal length adjustment of PTZ. Aperture control of PTZ.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/conceptronic/c8chcctvkit/user-manual-english/page-45.html>PAGE 45</a></h6><p>Chapter Seven Instructions of imac 7.1 Essential condition 1)Support the version OS X 10.6.3 or above of imac system. 2)Support DVR platform versions: Hisilicon v1.0.1.20 and higher. GRain v8.42 and higher. 7.2 Installation and operation instructions One method: To unzipped the Asee.app in windows xp os, copy it to the mac machine.and then you will find the icon. The other method: Download from App Store,Search for Asee ,find the corresponding program installation package (Asee.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/conceptronic/c8chcctvkit/user-manual-english/page-46.html>PAGE 46</a></h6><p>Capture Capture the current image (the default save path: the default pictures directory of mobile).</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/conceptronic/c8chcctvkit/user-manual-english/page-47.html>PAGE 47</a></h6><p>add device after inputting above information，click“ok”.enter main menu interface,click a picture,after appearing green frame(as shown window 1 in picture below),click a channel on right channel column(such as channel 1 ),connect play，as shown in the following figure connection play interface If there is error device information above,click to modify or click ,add the device again. Note：Asee on Imac platform can only add one device,and there is no PTZ control function.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/conceptronic/c8chcctvkit/user-manual-english/page-48.html>PAGE 48</a></h6><p>Chapter Eight FAQ (Frequently Asked Questions) 01：Why the DVR did not run after connect the power supply? ①Please check the power switch turn on or off at the rear panel of DVR. ②Please check if the turn on DVR operation correct or not? ③If you select the adaptor +12V, 5A or above? (8ch 5A, 16ch 220V 200W) 02：Still stop over on the boot-strap frame? Physical damaged in hard disk drive Boot manager abnormal.</p></li></ul></nav></div></section></section></main><footer class=page-footer><div class="container flex-column py-3 py-sm-4"><div class="row mb-1 mb-sm-2 mb-md-5"><a href=/ class="brand offset-sm-0 col-sm-4 col-md-3 col-lg-2 offset-2 col-8 text-center text-md-start"><img class=logo-small src=/assets/img/brand-large.png alt=Manualshelf></a></div><div class=row><dl class="text-center text-sm-start col-sm-3"><dt class=fw-bold>Who We Are</dt><dd><a class=text-decoration-none href=/about>About Us</a></dd><dd><a class=text-decoration-none href=/company>Company</a></dd><dd><a class=text-decoration-none href=/careers>Careers</a></dd><dd><a class=text-decoration-none href=/terms>Terms & Privacy</a></dd></dl><dl class="text-center text-sm-start col-sm-3"><dt class=fw-bold>Resources</dt><dd><a class=text-decoration-none href=/brands>List of Manufacturers</a></dd><dd><a href=/ class=text-decoration-none>Support</a></dd><dd><a class=text-decoration-none href=/press>For the Press</a></dd><dd><a class=text-decoration-none href=/press#assets>Media assets</a></dd><dd><a class=text-decoration-none href=/faq>FAQ</a></dd></dl><dl class="text-center text-sm-start col-sm-3"><dt class=fw-bold>Get in touch</dt><dd><a class=text-decoration-none href=#>Blog</a></dd><dd><a class=text-decoration-none href=#>Email</a></dd><dd><a class=text-decoration-none href=/dmca>DMCA</a></dd></dl></div><div class=row><div class="text-center text-sm-start col-sm-4 pe-sm-0"><a href=https://www.facebook.com/pages/ManualShelf/1488826334681423 class="fs-5 text-center d-inline-block social rounded-2 align-middle text-decoration-none me-2"><i class="fab fa-facebook-f"></i></a><a href=https://www.twitter.com/ManualShelf class="fs-5 text-center d-inline-block social rounded-2 align-middle text-decoration-none me-2"><i class="fab fa-twitter"></i></a><a href=https://plus.google.com/+ManualShelf class="fs-5 text-center d-inline-block social rounded-2 align-middle text-decoration-none me-2"><i class="fab fa-google-plus-g"></i></a><a href=http://www.pinterest.com/ManualShelf class="fs-5 text-center d-inline-block social rounded-2 align-middle text-decoration-none"><i class="fab fa-pinterest-p"></i></a></div><div class="col col-sm-8 d-flex flex-column align-items-center flex-sm-row flex-wrap flex-sm-nowrap justify-content-center justify-content-sm-end"><div class="copy w-auto d-flex align-items-center justify-content-center justify-content-sm-end mt-2 mt-sm-0 me-2">ManualShelf © 2013-2025</div><select class="form-select form-select-sm w-auto mt-2 mt-sm-0"><option value=usa>USA</option></select><div></div></div><div id=pixel><script>
googletag.cmd.push(function() { googletag.display('pixel'); });
</script></div></footer><script src=/assets/js/jquery-3.3.1.min.js></script><script src=/assets/js/bootstrap.bundle.min.js></script><script src=/assets/js/jquery.autocomplete.min.js></script><script type=text/javascript>
$.extend({
redirectPost: function(location, args) {
var form = '';
$.each(args, function(key, value) {
form += '<input type="hidden" name="' + key + '" value="' + value + '">';
});
form = '<form id="s1" action="' + location + '" method="POST">' + form + '</form>';
$(document.body).append(form);
$("#s1").submit();
}
});
$(document).ready(function(){
$("#query").autocomplete({
minChars: 3,
groupBy: 'type',
paramName: 'q',
dataType: 'json',
serviceUrl: '/autocomplete',
noCache: true,
showNoSuggestionNotice: true,
noSuggestionNotice: 'Zarro results found',
onSelect: function (suggestion) {
$.redirectPost(suggestion.data.url, {highlight: encodeURIComponent(JSON.stringify(suggestion.data.hls))});
}
});
var toc = $('.toc-selector');
if (toc.length) {
var slideParams = { duration: 800, easing: 'linear' };
toc.click(function() {
$(this).toggleClass('open');
var section = $('.toc-content');
var isCollapsed = section.attr('data-collapsed') === 'true';
if (isCollapsed) {
section.slideDown(slideParams)
section.attr('data-collapsed', 'false')
} else {
section.slideUp(slideParams);
section.attr('data-collapsed', 'true')
}
});
}
});
var lastSmall = $(window).width() < 576;
$(window).resize(function() {
var newSmall = $(window).width() < 576;
if (lastSmall != newSmall) {
lastSmall = newSmall;
window.location.href = window.location.href;
}
});
</script></body></html>
