Specifications

Conceptronic Wireless 54Mbps USB Adapter

Note: The IP Address for all computers must be in the same IP Address range, and

the Subnet Mask must be the same for all computers on your network. For

example, if the first computer is assigned an IP Address of 10.0.0.2 with a

Subnet Mask of 255.0.0.0, then the second computer can be assigned an IP

Address of 10.0.0.3 with a Subnet Mask of 255.0.0.0, etc.

3. Check the Device Manager to confirm that the wireless adapter is installed

correctly. Please refer to the Networking Basics section in this manual

entitled, “Checking the Installation of the Drivers for the Wireless Adapter.”

4. Check the Wireless Configuration for each wireless adapter. Please refer to

the Networking Basics section in this manual entitled, “Checking the

Wireless Configuration.”

5. Learn to share printers and files. Please refer to the Networking Basics

section in this manual entitled, “Adding and Sharing Printers in Windows

XP.”