Specifications

Conceptronic Wireless 54Mbps USB Adapter

Highlight the Internet Protocol (TCP/IP) entry and press the Properties button.

The Internet Protocol (TCP/IP) Properties dialog box opens, as shown below.

The USB adapter’s default is to Obtain an IP address automatically and to Obtain

DNS server address automatically using the Dynamic Host Configuration Protocol

(DHCP). If your network does not have a DHCP server, or if you need to assign your

computer an IP address that is different than the one assigned by your network’s

DHCP server, click the Use the following IP address click box. You can then enter

the IP address, subnet mask, and Default gateway’s address.