Specifications

Conceptronic Wireless 54Mbps USB Adapter
Authentication State will display Connected if you have provided either the
correct authentication information, or if authentication is disabled on the current
WLAN link.
Signal Strength displays a bar graph representation of the relative strength of the
signal used to maintain the current WLAN link. Maximum data rates are achieved
only when a maximum signal strength exists on the WLAN link.
Hardware Information displays the C54RU’c MAC address and the Regulatory
Domain (the region of the world that issues the radio use regulations) that it is
currently configured for.
Advance State displays whether the radio is on or off and whether the Turbo Mode
is enabled or not.
Click OK to exit the WLAN Utility. Clicking Cancel will not exit the WLAN Utility.
Options
Clicking the Option tab will open the following page.
Under the General Setting field, there are several useful options. Auto launch
when Windows start up will automatically start the WLAN utility every time you
start your PC. Enable IP Setting and Proxy Setting in Profile will allow you to use
the IP address and proxy server settings that are associated with each WLAN profile
to be used. If this box is unchecked, the IP address and proxy server settings made
in the Windows networking dialog boxes will be used. If you check this box, the IP
address and proxy server settings that were in use before (the Windows settings)
will be saved. The IP address and proxy server settings you entered for this WLAN
profile will be used for the connection. When you terminate the WLAN link, the
saved IP address and proxy server settings will be restored to their previous values.
16