Specifications

Conceptronic Wireless 54Mbps USB Adapter
script is stored, you can click the Use automatic configuration script click-box and
enter the address in the Address field.
Otherwise, you can click the Use a proxy server for LAN click-box. This will allow
you to enter the IP addresses and port numbers for the various proxy servers that
may exist on your LAN. You will need to ask your network administrator to
determine the proxy server settings for your network.
Once you have entered the appropriate proxy settings, you will need to click the
Apply button on the lower right-hand corner of the main menu, to make the
settings current.
Checking the C54RU’s Status
Clicking the Status tab on the main menu will open the following page.
Connection Status will display Connected or Disconnected depending on the
status of the WLAN link.
The SSID is the IEEE 802.11 Service Set Identifier of the WLAN Access Point or
WLAN peer that the C54RU is currently connected to.
The BSSID is the MAC or hardware address of the WLAN Access Point or WLAN peer
that the C54RU is currently connected to.
Network Type displays either Infrastructure − if the C54RU is connected to an
Access Point, or Ad-hoc − if the C54RU is connected to a WLAN peer.
Frequency displays either 802.11g-2.4GHz or 802.11b-2.4GHz, depending upon
which WLAN standard is in use by the device the C54RU is currently connected to.
Data Encryption displays Enable if WEP is enabled and in use for the current WLAN
connection. Otherwise, Disable is displayed.
Speed displays the current theoretical top data rate of the current WLAN
connection. The displayed maximum speed is related to the signal strength.
15