Specifications

Conceptronic Wireless 54Mbps USB Adapter
the Obtain an IP address automatically click-box. You can also click the Obtain
DNS server address automatically click-box.
Click on IP & Proxy Setting to set the IP address, Subnet mask, and Default
gateway manually instead of obtaining the IP address automatically through the
Dynamic Configuration Host Protocol (DCHP) server. You may also set the DNS
server address settings and WINS address settings.
If the network you are using is a computer-to-computer (or ad-hoc) network, no
access points are used. You may check the box This is a computer to computer
(ad-hoc) network; no access points are used to enable this option.
Using a Proxy Server
Some LAN networks will establish a proxy server to handle the downloading of web
pages, etc. and storing them temporarily so other users on the LAN can access
them without having to reload the web page from the Internet each time. This
allows for some saving of the available bandwidth in the connection between the
Internet (WAN) and the LAN.
If your LAN has such a server, you will need to configure your C54RU to be able to
connect to it. You will need to obtain the necessary connection information from
your network administrator.
Click on the ProxySetting tab to open the following screen.
If your network administrator has installed and enabled the automatic proxy server
configuration, you can click the Automatically detect settings click-box.
Alternatively, if you know the address of the PC where the automatic configuration
14