Webcam User Manual
configure your display to show at least 65’000 colors for example at least 16-
bit. 
NOTE:
 Applying only 16 or 256 colors on your computer will produce dithering 
artifacts in the image. 
A2:
  The configuration on the (Wireless) Internet Camera image display is 
incorrect. Through the Web Configuration Image section you need to adjust 
the image related parameter for improve images such as brightness, contrast, 
hue and light 
frequency. Please refer to the Web Configuration section for detail 
information. 
Q:
  There are no images available through the web browser? 
A:  The ActiveX might be disabled. If you are viewing the images from Internet 
Explorer make sure ActiveX has been enabled in the Internet Options menu. 
Alternatively, you can use the Java Applet for viewing the required images. 
9.4. Xplug Control Installation 
9.4.1. Installation To Web Server 
1.  Installation: 
Copy the “xplug.ocx” file from the directory “ActiveX” on the CD-ROM to any 
WEB Server table. 
2.   Setting (Configuration): 
From the Web Configuration menu select “System” and under the “Loading 
ActiveX From” input web server location (http://www.web server 
location.com/). 
Once the settings are completed, the user now is able to access the Internet Camera 
from the web browser by selecting the image view – ActiveX mode. 
NOTE: 
It is highly recommended to install the Xplug Control application to the Web 
Server for IE 5.0. It must be installed to a Public Domain with Fixed IP 
address. 
9.4.2. Installation To Local PC 
Insert the CD-ROM into the CD-ROM drive to initiate the auto-run program. Navigate 
to the directory “ActiveX’ on the CD-ROM and execute the program “CPCTRL.EXE” 
  Follow the onscreen instructions to install the XPlug Control. 
Click the “Finish” button to complete Setup of the Xplug Control Utility program for the 
(Wireless) Internet Camera. 
9.5. Adjust Internet Camera Focus 
To adjust the focus of the lens, you need to turn the lens slowly in either clockwise or 
anti-clockwise direction until the desired image appears. DO NOT over turn the lens 
in either of the directions, as it will be out of focus. 
NOTE:
 You can further adjust the (Wireless) Internet Camera's image quality through 
System Administration – Image of Web Configuration. Please refer to Web 
Configuration section for further details. 
WARNING:










