Installation guide

- 51 -
 PAN-TILT CONTROL Panel (optional, not available for CNETCAM2 and
C54NETCAM2)
When you connect a pan/tilt camera, the system will detect the camera’s
function automatically and the PAN-TILT CONTROL buttons will become
functional. Otherwise, these buttons are displayed as gray out buttons.
- Direction/Home buttons: Click these buttons to adjust the camera’s
viewing angle to Up ( ) / Down ( ) / Left ( ) / Right ( ) /
Left-Up ( ) / Left-Down ( ) / Right-Up ( ) / Right-Down ( ).
Click the Home button ( ) to return the camera to the default position.
- SWING: If you have saved two or more positions for the selected camera,
click this button to control the camera swinging from one position to
another position.