Installation guide

- 44 -
Software User Guide
This Software User Guide provides detailed instructions on operating Ultra View,
a customized software application with a user-friendly interface allowing you to
access and control your camera(s). You can connect up to 16 cameras to
monitor different places and record events for each camera. With Ultra View,
you can also change some basic settings of the camera, such as schedule
profiles and motion detecting. In addition, if your camera supports advanced
features, such as audio or pan/tilt function, you can use these functions through
the control panels of Ultra View.
To use Ultra View, you have to install it in your computer. It is recommended to
use a high performance computer if you want to connect multiple cameras
simultaneously. The following provides the system requirements:
Platform: Microsoft® Windows® 2000/XP/Vista.
Hardware Requirement:
1 camera connected: Intel Pentium III 800MHz; 512MB RAM
2 ~ 4 cameras connected: Intel Pentium 4 1.3GHz; 512MB RAM
5 ~ 8 cameras connected: Intel Pentium 4 2.4GHz; 1GB RAM
9 ~ 16 cameras connected: Intel Pentium 4 3.4GHz; 2GB RAM
Resolution: 1024x768 or above
Note: When you use Ultra View to record video clips, store the recorded files to
an exclusive hard disk drive in your computer to ensure that there will be
enough storage space.