Installation guide

- 41 -
4.9 Tools
The Tools menu provides the commands that allow you to restart or reset the
camera. You can also backup and restore your configuration, and upgrade the
firmware for the camera.
 Factory Reset
Click Reset to restore all factory default settings for the camera.
 System Reboot
Click Reboot to restart the camera just like turning the device off and on.
The camera configuration will be retained after rebooting.
 Configuration
You can save your camera configuration as a backup file on your computer.
Whenever you want to resume the original settings, you can restore them by
retrieving the backup file.
- Backup: Click Get the backup file to save the current configuration of
the camera.
- Restore: Click Browse to locate the backup file and then click Restore.