Installation guide

- 30 -
Network >> Wireless Setting
 Wireless
The camera supports WLAN while you use the wireless network. Select the
Enable option to enable this feature.
- Network ID (SSID}: Keep the default setting of this option to connect the
camera to any access point under the infrastructure network mode. To
connect the camera to a specified access point, set a SSID for the camera
to correspond with the access point’s ESS-ID. To connect the camera to an
Ad-Hoc wireless workgroup, set the same wireless channel and SSID to
match with the computer’s configuration.
Click Site Survey to display the available wireless networks, so that you
can easily connect to one of the listed wireless networks.
- Wireless Mode: Select the type of wireless communication for the camera:
Infrastructure or Ad-Hoc.
- Channel: Select the appropriate channel from the list.
- Authentication: Select the authentication method to secure the camera
from being used by unauthorized user: Open, Shared-key, WPA-PSK, and
WPA2-PSK. The following table explains the four options: