Installation guide

- 12 -

3.2 Accessing to the Camera

Whenever you want to access the camera:

1. Open the Web browser on your computer (for example, Microsoft Internet

Explorer in this guide)

2. Type the default IP address (192.168.0.40 for CNETCAM2 or 192.168.0.45 for

C54NETCAM2) or the IP address found by IP Finder in the Address bar, and

then press [Enter].

After you login into the Web Configuration of the camera, the main page will

appear as below:

In the main menu, you can select the following options:

ActiveX – View the network camera in ActiveX Mode

Java Applet – View the network camera in Java Mode

Setup – Open the configuration pages of the network camera