User`s guide

C54APRA2+ / C54APRB2+ Wireless ADSL Router User Guide
66
Configure Wireless Access Control
To create a list of MAC addresses that are banned or allowed association with the wireless access point:
1. Click in the Enable Access List option box to select it.
2. Select the action to perform on the MAC address to be specified. Choose to Allow or Deny association.
3. Type in the MAC Address in the entry field provided.
4. Click the Add button to add the MAC address to the list. The MAC address will appear listed in the table
below.
5. After compiling the list of MAC addresses as desired, click the Apply button to enforce access control for the
MAC addresses in the list.
To remove any MAC address from the list, click the radio button in the left column of the list for the MAC address to
be removed and click the Apply button.
Configure Multiple SSID
Multiple SSID cannot be used if the access point has either WEP or WPA enabled. This must first be disabled in the
Wireless Settings window located in the Home directory.
To configure multiple SSID:
1. Disable WEP or WPA in the Wireless Settings window of the Home directory.
2. Click in the Enable Multiple SSID option box to select it.
3. Enter the SSID you want to add.
4. Click the Add button to add the SSID to the list.
5. Click the Apply button to enable the listed SSIDs.
To remove an SSID from the list, click the radio button in the left column of the list for the SSID to be removed and
click the Apply button.