User`s guide

C54APRA2+ / C54APRB2+ Wireless ADSL Router User Guide
5
Rear Panel Connections
All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on the Router.
Use the Reset button to restore the settings to the factory default values in the next chapter for instructions on using the
reset button).
Connect network cables:
1. Insert the ADSL (telephone) cable included with the Router into the ADSL port and then connect the cable to
your telephone line.
2. Insert one end of the Ethernet cable into one of the LAN ports on the back panel of the Router and the other
end of the cable to an Ethernet Adapter or available Ethernet port on your computer.
3.
WARNING!
Using a power supply with a different voltage rating will
damage the device and void the warranty of this product.
ADSL Port
Use the ADSL cable to connect to the
your telephone line (RJ-11 port)
Ethernet Ports
Use the Ethernet ports
to connect the Router
to your Ethernet LAN or
computer
Power Insert
Use the adapter
shipped with the
Router to connect to
power source
Power Switch
Use the power switch to
turn the Router on and off