User manual

ENGLISH
16
5.4 Connect manually to your wireless network
The wireless utility will automatically show all available wireless networks within the range of your 300N
Wireless Rescan
available wireless networks.
- Select the network you want to connect to from the list of available wireless networks.
- Add to Profile
The wireleAdd to Profile
Note: If you want to connect to a temporary wireless network (for example: a hotspot), you can also use
ConnectConnectAdd to Profilebutton,
the connection information will be deleted when you restart your computer.
Non-password protected network (unsecured):
Enter a name for your profile, verify that the correct SSID (wireless network) is selected and click the
OKe profile your profile list.
Profile
Activate
The wireless utility will connect to the wireless network directly. When you are connected, the wireless
utility will indicate the signal strength in your system tray:
Note: If you are connecting to your own network and it is unsecured (not protected by a password), we
advise you to enable security on your network to prevent unauthorized access to your network.