User manual

ENGLISH
15
5.3 Connect automatically using the WPS PIN Code function
When your router or access point is WPS capable, but does not have a (virtual) push button, you can
create a WPS connection using the PIN Code function.
Note: Your wireless router or access point needs to have the WPS PIN Code function in its web interface
in order to use this function.
EnrolleeRegistrar
- Enrollee
WPS configuration of your router or access point.
- Registrarode is selected, you can enter a PIN Code in the wireless utility. This mode is
needed when your router or access point provides a PIN Code which must be used for the wireless
connection.
- Activate the WPS PIN Code function on your router or access point.
- Config Mode
- PIN
You can see the WPS activity at the bottom of the window:
When the WPS PIN Code authentication is coPIN Get WPS profile
successfully
- WPS Profile ListConnect
the wireless connection.
You are now connected to your wireless network. The wireless utility will indicate the signal strength in
your system tray: