User manual

ENGLISH
12
4. Driver & software installation
When the 300N Wireless USB Adapter is connected to your computer, you can proceed with installing the
Conceptronic drivers & software.
A. Insert the CD-ROM in the optical drive of your computer. The AutoPlay option will be shown
Run Autorun.exe
Note: If the AutoPlay option is not shown, you can start the autorun menu by browsing to
Computer
B. Install Drivers & Software
appear.
Note: User Account Controlssage, which you will need to accept by
Yes
C. I Agree..Next
D. Install driver and Conceptronic Wireless Network Configuration Utility
the ConceptInstall drivers only
Next
Note: If you are using Windows XP and selected to install both drivers and utility, you will be asked
whicConceptronic Configuration Tool
Next
E. Install
The drivers & software (if selected) will be installed on your computer.
F. When the instaFinish
G. The Conceptronic Wireless Network Configuration Utility will be shown if you have selected to install
the drivers and the software.
Note: It is recommended to restart your computer when the new hardware installation has been
completed.
You can now proceed to chapter 5 to connect to a wireless network.