User manual

ENGLISH

2. The 300N Wireless USB Adapter explained

Nr Description Status Explanation

A. USB connector - Connect the C300RU to your computer.

B. Activity LED Off The adapter is not connected to a network.

Flashing randomly The adapter is connected to a network and

sending or receiving data.

C. WPS button - Press to start the WPS function.

3. Hardware installation

Before you can install the drivers & software, you need to connect the 300N Wireless USB Adapter to your

computer.

 Turn on your computer.

 Plug the 300N Wireless USB Adapter into a free USB port on your computer.

New Hardware Wizard

 Cancel

You can now proceed with the driver & software installation, described in chapter 4.

Note: When using Windows 7, you may skip chapter 4, since windows 7 will automatically install the

needed native drivers. However, when using these native drivers, the WPS functionality and the

Conceptronic Wireless Network Config Utility are not available. When you choose to skip chapter

4, you can also skip chapter 5.1 ~ 5.4 and continue to chapter 5.5.