Wireless Broadband Router User Manual

Conceptronic C300BRS4 User Manual

J. You can change the SSID of the

router. The SSID is the name which

will be broadcasted through the

Wireless part.

You can change the channel between

channel 1 and 13. If you experience

slow connections or break-downs,

there can be another accesspoint in

your area which can interfere with

your wireless channel. In that case,

you can try another channel.

When completed, click “Next”.

You can secure your Wireless Connection with encryption. By default, the Wireless Connection is not

secured. To prevent unauthorized access to your network, set a security level through the Setup

Wizard.

If you want to use the WPS feature of the C300BRS4, you can skip the wireless configuration and

continue the Setup Wizard without encryption. To setup your WPS security, please proceed to the

section ‘HOME – WIRELESS’ of this chapter.

Note:

All security options of the Setup Wizard are explained, but it is advised to secure your

network with “WPA-PSK/WPA2-PSK” security if your Clients do not support WPS. This is the

highest WPA2 security level, with backwards compatibility to WPA only clients.

Note:

Remember or write down the entered wireless security information. You will need it when

you want to configure a Wireless Client to connect to the C300BRS4!

K. Select a security level for your

Wireless Network.

When a security level is chosen, the

Wizard will show fields for the

required information.