User`s manual

ENGLISH

D. Add

E. Select a preset service from Select a Service

Custom Server

F. Server IP Address

field.

G. Enter the ports which need External Port Start

External Port End

H. Select a prototol or your port forwarding rule froProtocolTCPUDP

Both

Note: If you do not know which protocol you need for your port forwardingBoth

will pass both TCP and UDP traffic to the configured IP address of your computer/server.

I. Internal

Port StartInternal Port End

J. Apply

The added rule is now visible in the port forwarding list.

To create more port forwarding rules, repeat steps D to J.