User manual

CONCEPTRONIC C150APRA2 ENGLISH
78
5.4.10.6 Advanced – Network Tools – SNMP
In the NETWORK TOOLS page, click SNMP. The page as shown in the following figure appears:
In this page, you can set the SNMP parameters. The following table describes the parameters in this
page.
Field
Description
Enable SNMP Agent
Select or deselect the check box to enable or disable SNMP agent.
Read Community
Universal character to obtain the device information. It is similar
to the password. The SNMP application entity can use it to
directly obtain the device information.
Set Community
Universal character to modify the device configuration. It is
similar to the password. The SNMP application entity can use it to
directly modify the device configuration.
Trap Manager IP
Enter the address of the server that receives the trap message.
Trap Community
The field that is included in the trap message sent by the device.
Trap Version
Select the trap version from the drop-down list. You can select v1
or v2c.
Click Apply to save the settings.