User manual

CONCEPTRONIC C150APRA2 ENGLISH
57
The following table describes the parameters in this page.
Field
Description
Protocol Type
Select the protocol type to be mapped from the drop-down list.
You can select PPPoE, IPv4, IPv6, AppleTalk, IPX, NetBEUI, or
IGMP.
Destination MAC Address
Enter the destination MAC address to be mapped.
Source MAC Address
Enter the source MAC address to be mapped.
Frame Direction
Select the frame direction to be mapped from the drop-down list.
The device supports frame direction from LAN to WAN and that
from WAN to LAN.
Time schedule
Select the time that you want to apply the rule from the drop-
down list. You can select always or never.
Wan interface
Select the WAN interface to be mapped from the drop-down list.
Click Apply to save the settings.