Operation Manual

SNMP Configuration
The Simple Network Management Protocol(SNMP) let a network administrator monitor
on a network by retrieving settings on remote network devices. Network administrator
typically runs an SNMP management station program such as MIB browser on a local
host to obtain information from an SNMP agent such as the router you use now.
System Name:
Enter information about the system name in the system contact field.
System Contact:
Enter information about the system contact person in the system contact field.
System Location:
Enter information about the system contact person in the system contact field.
The SNMP Version:
Show the SNMP version.
Trap IP:
Enter the IP address of a host acting as an SNMP console which the Router
should send SNMP trap messages in the Trap host IP field.
Note: Click the Submit button to save the settings in temporary memory. If
you make changes the configurations.